SAIDI and SAIFI, as daily operating metrics.
Reliability is measured in minutes, not quarters. LVIoT gives DISCOMs feeder-level, 1-second visibility into interruption causes, duration and fault radius — so MTTR stops being a mystery and starts being a lever.
Reliability is what you measure minute-by-minute. Not what you report quarter-by-quarter.
SAIDI, SAIFI and CAIDI are industry reliability indices — System Average Interruption Duration, Frequency and Customer Average Interruption Duration. Traditionally they are aggregated quarterly from paper logs. LVIoT computes them live, per-feeder, per-DTR, so the conversation moves from compliance to operations.
+ 22%
SAIDI improvement over an year on monitored feeders.
– 96 min
Mean time to recovery reduction per event on LVIoT feeders.
99.2 %
Availability on monitored Urban 11kV feeders, 90-day rolling.
01
The LT side was dark
Most SCADA investment stops at 11kV. The last mile — 415V feeders, DTs, feeder pillars — are SCADA-dark zones. That is where 70% of consumer-felt outages originate.
02
MTTR is a discovery tax
Without upstream visibility, crews spend 60–80% of their “repair” time figuring out what broke and where. Predictive alerts compress that time frame.
03
DERs are rewriting load curves
Rooftop solar, EV charging and battery storage flip traditional feeder assumptions. Reliability engineering needs the data to keep up.
01
Real-time feeder-level monitoring
Every LT feeder and DTR reports load, voltage, phase balance and event telemetry at 1-Hz. Your control room sees the grid the same way air traffic sees a runway.
Feeder F-12 voltage dip → automated root-cause query → DTR-4421 coincident trip → ticket created in 4 seconds.
02
Predictive breakdown alerts & MTTR reduction
The AI engine correlates anomalies across feeders and predicts the next trip. Crews are pre-positioned. Dispatch happens before, not after.
Average dispatch time across monitored zones dropped from 38 min to 11 min.
03
Load balancing & DER integration readiness
Rebalance phases, spot DER reverse-flow, and prepare your network for EV and rooftop adoption — all from the same telemetry.
Phase imbalance flagged on 14% of DTRs; rebalancing cut LT losses by 3.1 percentage points.
Questions buyers ask about power reliability.
Per-feeder, per-minute, based on live interruption telemetry. Indices roll up to DTR, division and state level in the console. Audit trail is retained for 24 months.
No. It complements SCADA for the LT side — below 11kV — where SCADA typically is not deployed. Integration with your existing SCADA/DMS is via open APIs.
Yes. The SAIDI/SAIFI audit trail is regulator-ready and exportable to your SERC’s reporting format.
LVIoT edge devices buffer up to 48 hours of telemetry locally and resync on reconnect. No gaps, no silent failures.
Let’s get specific
30 minutes on your grid, with our engineers.